Take that foam away by fitting a regular tyre and the change is obvious. At 100 km/h on the Dubai–Al Ain Road, a Ghost on non-foam tyres can sound like a far cheaper car. That is the starting point of every Rolls-Royce job we do.
Rolls-Royce tyre sizes and pressures
Most common factory sizes for UAE-spec cars. Trims differ — the sidewall of your current tyre and the door placard are the final word.
| Model | Tyre sizes | Factory tyre | Pressure |
|---|---|---|---|
| Rolls-Royce Cullinan | 255/45 R22 front285/40 R22 rear | Pirelli Scorpion Zero / P Zero PNCS (Rolls-Royce approved) | Placard; typically 36–44 psi |
| Rolls-Royce Ghost (2nd gen, 2020+) | 255/40 R21 front285/35 R21 rear | Pirelli P Zero PNCS, Michelin Pilot Sport 4 S | Placard; typically 35–42 psi |
| Rolls-Royce Phantom VIII | 255/40 R22 front285/35 R22 rear | Pirelli P Zero PNCS | Placard; typically 36–44 psi |
| Rolls-Royce Wraith / Dawn | 255/40 R21 front285/35 R21 rear | Pirelli P Zero, Bridgestone Potenza (earlier cars) | Placard; typically 35–42 psi |
What Rolls-Royce cars need from a tyre
Rolls-Royce cars are very heavy, very quiet and driven gently, so the tyres rarely wear out from grip. They age out. A Phantom that covers 4,000 km a year in the UAE can reach six years with tread still showing, yet the rubber will be hardened and cracked by years of sun. Look at the DOT code as well as the tread. When you do replace, match load index and PNCS foam front and rear. Staggered sizes on all current models mean no rotation, so rear tyres on a Cullinan used for desert-edge trips will go before the fronts. Keep pressures at the placard figure: underinflation on a 2.7-tonne SUV builds heat quickly in summer.
Run-flats, TPMS and fitting notes
Older Phantom VII cars once used run-flat systems, but current models do not; they rely on direct TPMS and a sealant kit, with some cars carrying a space-saver. Foam-lined tyres can still be repaired from the inside, but the foam must be cut back carefully around the puncture first; a plug alone is not a proper repair. We also use wheel-safe clamps and plastic-covered tools: Rolls-Royce wheels, with their self-righting centre caps, are expensive to scratch. For a flat at home, our mobile tyre service can repair or swap the tyre on your driveway, so the car never needs a recovery truck.
Tyre brands we recommend for Rolls-Royce
Pirelli
Main OE partner with PNCS foam in current Cullinan, Ghost and Phantom sizes, the closest you get to factory quietness.
Michelin
Pilot Sport 4 S in correct load ratings is a credible alternative on Ghost and Wraith, including Acoustic variants in some sizes.
Continental
ContiSilent versions are available in a few sizes for owners who cannot get PNCS stock quickly.
Tyre problems we see on Rolls-Royce cars
- Fitting non-foam tyres on one axle only, causing a noticeable noise imbalance.
- Tyres older than six years on low-mileage cars, with weather cracks in the grooves.
- External plug repairs on PNCS tyres instead of a proper internal patch.
- Scratched wheels and damaged centre caps from rough tyre machines.
Rolls-Royce tyres: FAQs
What is PNCS on a Rolls-Royce tyre?
PNCS is Pirelli's Noise Cancelling System, a foam layer inside the tyre that absorbs cavity noise. It is a big part of the quiet ride in a Rolls-Royce.
Can you repair a puncture in a foam-lined tyre?
Yes, if the damage is in the tread area. The foam is removed around the hole, the tyre is patched from the inside, and the foam area is sealed.
How often should I replace Rolls-Royce tyres?
Many owners in the UAE replace them by age rather than wear. We recommend replacing them after about six years even if tread remains.
